1000 points to whoever can solve my issue

[Drywallman3]

NetGear sucks by the way i had it and i had quite of few issues with it kinda like the issues you are having.

mine works fine if I have it set to only my wife's lap top working off it...........

[pokerchamp89]

you should get the belkin router gaurentee you wont have that issue you anymore

[StephyMarieC]

I asked how many devices because your router will start kicking things off if too many are connected.

[Zab]

This happened to me recently...Usually its the connection due to being far away or weak connection.....

Im not good with comps but I opted to restore my comp to factory condition b.c i coiuldnt figure a way to fix it and then started working again....but im sureeeee there is a easier way to do it,.

My desktop is connected to my wireless router via ethernet cable :|

[Zab]

Ok first off in past experience it could be 2 things either your router is having problems with recognizing the modem and gainning the IP info for you comp or your comp mite not be reonizing the router's IP

And the fix is?

[Zab]

I asked how many devices because your router will start kicking things off if too many are connected.

3 wired, 5 wireless

[Zab]

you should get the belkin router gaurentee you wont have that issue you anymore

If I cant fix it tonight I'll do that

[StephyMarieC]

You should check to see how many you can have connected at once to rule that out.

[Drywallman3]

3 wired, 5 wireless

that does make a huge difference in your comp speed, now it is a issue of your wireless router............ I am assuming your tower is connected to it's own cable line?

[jordinf]

Go to your routers page and turn dmz or open all ports for the computer that is having issues, Once all ports are open try and connect to your sites if it connects just fine then you just need to open the correct ports for the sites you are using. Also try and run a bandwidth/speed test to see how fast your internet connection is, In most cases you are just pulling more bandwidth than you have available. You can also set the the max amount of bandwidth allowed per device so you can limit the devices that you use the least etc.